But after being sent a another one as a replacement for my broken one. In either case, if you observe it to be inaccurate, you can simply. Another challenge was that I could not find a working library for my first OLED screen. based support staff by Submitting a Request or by chatting with our Live Agents. The weather indicator automatically detects your location to display the weather information. If you are still experiencing concerns, please contact our U.S. My Weather Indicator displays the present weather and weather forecast using the system tray indicator applet and desktop widget. If you believe your Wind Direction readings to be inaccurate, please review the link below before attempting the above troubleshooting. If the AcuRite Iris™ (5-in-1) sensor is not reporting any wind speed, please perform the hard reset linked below:ĪcuRite Iris™ (5-in-1) Reset If you are using a High Definition display unit such as model #06058M or #06088M, please use the following reset linked below:ĪcuRite Iris™ (5-in-1) High Definition Display Reset #MY WEATHER INDICATOR NOT WORKING INSTALL#Reinsert the screw (removed during step 1) into the hole. I've installed my-weather-indicator software using these commands: sudo add-apt-repository ppa:atareao/atareao sudo apt-get update sudo apt-get install my-weather-indicator. Make sure that the Wireless Reception Indicator on the display. Tip the AcuRite Iris™ (5-in-1) Sensor upside down (so wind cups are on the bottom), then right side up several times.Ĥ. Bring both the sensor and display unit together and remove batteries from the outdoor sensor. Spray a small amount of lubricant into the hole. Remove the screw located below the sensor’s wind cups. Then make sure there are no obstructions between the station and thermometer like trees or buildings which could block its transmission to La Crosse weather stations. If they hesitate or stop, try lubricating with graphite powder or spray lubricant.ġ. Answered, 202055, Add percentage chance of precipitation to the forecast Needs information, 201877, Not installing properly Solved, 178593, Showing details N. If your outdoor sensor is not working, then first check that it has power by testing the batteries. If you are comparing to a local news station, they are following the National Weather Service guidelines. You will receive an accurate reading for the location your sensor is mounted including all surroundings. We understand not all of our customers can mount this high. Ensure it’s mounted a minimum of 5-feet in the air with no obstructions around it (within several feet). The National Weather Service recommends mounting the sensor 33 feet above the ground with no obstructions within 100 feet for the most accurate wind speeds. batteries may lose charge whenever the car is left in the cold or hot weather. Make sure to compare data using a sensor positioned at the same mounting height. My Jumpstarter shows charged but is not working. #MY WEATHER INDICATOR NOT WORKING PRO#
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |